PEG接枝氧化石墨烯的制备与细胞成像

通过酯化反应将不同分子量的聚乙二醇（PEG）接枝到氧化石墨烯（GO）表面,得到系列GO-PEG。利用傅里叶变换红外光谱（FTIR）、拉曼光谱（Raman）、扫描电子显微镜（SEM）对GO-PEG的结构和形貌进行了表征,用热重分析（TGA）测定了GO-PEG中PEG的接枝量。SEM结果表明GO-PEG的剥离程度高于GO。GO-PEG在磷酸盐缓冲溶液中具有良好的分散稳定性,稳定性与接枝量呈正相关。GO-PEG通过非共价键合作用对荧光素（Flu）的负载量可达1.75mg·mg^-1,且负载量受接枝量影响;另外,GO-PEG对Flu的释放行为具有pH值触发药物释放性能。将接枝PEG的端羟基与Flu共价键合,所得GO-PEG₆₀₀₀-Flu荧光探针实现了对HepG₂细胞的成像。     

Loading characteristics and chemical stability of headgroup‐functionalized poly(ethylene glycol)‐lipid ligand tethers on polypropylene capillary‐channeled polymer fibers

Polypropylene capillary‐channeled polymer fibers have been modified by adsorption of headgroup‐functionalized poly(ethylene glycol)‐lipids to generate a species‐specific stationary phase. In order to study ligand binding characteristics, a fluorescein‐labeled poly(ethylene glycol)‐lipid was used as a model system. Breakthrough curves and frontal analysis were employed to characterize the surface loading characteristics across a range of lipid concentrations and mobile phase flow rates. Efficient mass transfer and fluid transport yield a linear adsorption isotherm up to the maximum loading concentration of 3 mg/mL, at a linear velocity of 57.1 mm/s. Under these conditions, the dynamic binding capacity was found to be 1.52 mg/g of fiber support. Variation of the linear velocity from 8.6 to 57.1 mm/s showed only small changes in breakthrough volume. The maximum capacity of 1.8 mg/g is found under conditions of a load velocity of 34.2 mm/s and a concentration of 3 mg/mL lipid. Exposure of the lipid modified fibers to several challenge solvents reveals a chemically robust system, with only 50% acetonitrile and hexanes able to disrupt the lipid adsorption. The straightforward capillary‐channeled polymer fiber surface modification with headgroup‐functionalized lipids provides both a diverse yet practically robust ligand tethering system.     

Pd增强缺陷态TiO2纳米管阵列的光催化产氢性能

通过光还原沉积法, 利用氧空位诱导作用, 在Ni掺杂的缺陷态TiO₂纳米管阵列(TNT-Ni)上得到金属 Pd含量不同的Pd-TNT-Ni催化剂. 采用场发射扫描电子显微镜(SEM)、 X射线光电子能谱(XPS)、 紫外-可见 漫反射(UV-Vis DRS)、 表面光电压(SPV)、 光致发光光谱(PL)和电化学测试等表征手段, 探究了Pd与Ni掺杂的缺陷态TiO₂纳米管阵列之间的强相互作用对其光吸收特性和载流子分离及传输效率的影响, 阐明了强相互 作用对材料光催化活性的调控机理, 提出了Pd增强Pd-TNT-Ni光催化性能的作用机理. 结果表明, 通过光还 原法制备的Pd纳米颗粒尺寸为10~20 nm的Pd₁₂₀-TNT-Ni样品的光响应值为4.22 mA/cm², 是未负载Pd样品光 响应值(1.14 mA/cm²)的3.7倍, 其具有最佳的平均产氢速率(5.16 mmol·g^?1·h^?1), 是TNT样品平均产氢速率 (0.45 mmol·g^?1·h^?1)的12倍, 表明Pd与缺陷态TiO₂纳米管阵列之间的强相互作用驱动了载流子的分离及传输, 且Pd作为电子捕获势阱及反应活性位点, 显著提高了材料的光催化性能.     

高分散还原态Pt基催化剂的制备及其NO氧化的催化性能

Pt⁰被认为是NO氧化的活性物种,而催化剂的制备方法对活性物种的含量起着决定性作用。本文采用非惰性气氛保护的改性醇还原-浸渍法(MARI)合成了高分散高Pt⁰含量的1% (w, 质量分数) Pt/SiO₂-Al₂O₃催化剂(MA-Pt/SA)。X射线粉末衍射(XRD)、CO-漫反射傅里叶变换红外吸收光谱(CO-DRIFTS)和透射电镜(TEM)表征证实在550 ℃焙烧3 h后催化剂的Pt颗粒仅有3.8 nm。同时,X射线光电子能谱(XPS)和H₂-程序升温还原(H₂-TPR)结果表明催化剂具有高Pt⁰含量(60.3%)。模拟柴油车尾气气氛进行活性测试,并与传统浸渍法制备的1% (w) Pt/SiO₂-Al₂O₃催化剂(C-Pt/SA)对比,结果显示MA-Pt/SA具有优异的催化氧化性能,其NO最大转化率高达74%,比C-Pt/SA的NO转化率高了23%。经670 ℃高温老化15 h后,老化的MA-Pt/SA的NO转化率仍然高达69%。此外NO + O₂共吸附原位漫反射傅里叶变换红外吸收光谱(in situ DRIFTS of NO + O₂ co-adsorption)表明高的Pt分散度和高Pt⁰含量能够促进中间物种桥式硝酸盐的生成及分解,进而导致了优异的NO氧化活性。最后,利用同样方法将Pt的负载量降低至0.5% (w)制备催化剂,NO转化率仍达64%。这种制备方法能够获得低贵金属高性能的Pt基催化剂。     

基于氮掺杂活性炭催化氧化合成氮甲基氧化吗啉的研究

以三聚氰胺为氮源,商用活性炭为研究对象,通过“浸渍吸附+高温热处理”的方式制得系列氮掺杂活性炭,并用于催化氧化合成氮甲基氧化吗啉（NMMO）。采用N₂吸附/脱附、Raman、XPS等对氮掺杂活性炭的孔结构和表面性质进行了表征。结果表明：随着三聚氰胺负载量的增大,氮掺杂活性炭的表面碱性含氮官能团含量增大,进而体现出更好的催化氧化合成NMMO活性。最佳催化剂（ACO850-20N）在催化剂加量为0.02 wt%,反应温度70 ℃和反应时间4 h的工艺条件下,氮甲基吗啉的转化率和NMMO收率可达99.76%和94.31%。      

Identification of key classification features of early cervical squamous cell carcinoma

Despite the tremendous progress in molecular analysis of pan-cancer, little is known regarding molecular classification of cervical squamous cell carcinoma. In this study, we adopted a multi-omics approach to identify potential key classification features of cervical squamous cell carcinoma. Specifically, we analyzed mRNA, and microRNA (miRNA) expression data, as well as DNA methylation and copy number variation in cervical squamous cell carcinoma cases, using datasets obtained from The Cancer Genome Atlas (TCGA). Moreover, we identified molecules in each dimension, as well as integrated and clustered filtered classification features, and used them to distinguish different subtypes. The resulting key classification features were used to establish a classification model for cervical squamous cell carcinoma. Our results revealed two cervical squamous cell carcinoma subtypes, with significant differences across clinical survival levels, as well as 8 key classification features of cervical squamous cell carcinomas. These findings are expected to provide important references for early classification of cervical squamous cell carcinoma and identification of classification markers.     

Robust nickel silicate catalysts with high Ni loading for CO2 methanation

CO₂ is the main component of greenhouse gases and also an important carbon source. The hydrogenation of CO₂ to methane using Ni-based catalysts can not only alleviate CO₂ emissions but also obtain useful fuels. However, Ni-based catalysts face one major problem of the sintering of Ni nanoparticles in the process of CO₂ methanation. Thus, this work has synthesized a series of efficient and robust nickel silicate catalysts (NiPS−X) with different nickel content derived from nickel phyllosilicate by the hydrothermal method. It was found that the Ni loading plays a critical role in the structure and catalytic performance of the NiPS−X catalysts. The catalytic performance gradually increases with the increase of Ni loading. In particular, the highly dispersed NiPS-1.6 catalyst with a high Ni loading of 34.3 wt% could obtain the CO₂ conversion greater than 80%, and the methane selectivity was close to 100% for 48 h at 330 °C and the GHSV of 40,000 mL g⁻¹ h⁻¹. The excellent catalytic property can be assigned to the high dispersion of Ni nanoparticles and the strong interaction between the active component and the carrier, which is derived from a unique layered silicate structure with lots of nickel phyllosilicate and a large number of Lewis acid sites.     

爆轰波对碰驱动平面锡飞层的动力学及动载行为特征研究

强冲击下的物质变形、破坏及诱发的轻重介质混合问题,是内爆压缩科学和工程应用领域的研究重点.本文针对爆轰波对碰条件下的复杂加载动力学过程及其动载破坏形态特征,开展数值模拟研究与极曲线理论分析.设计了爆轰波对碰驱动平面锡飞层的计算模型,获得了爆轰加载动力学过程及波系相互作用物理图像,分析了锡飞层对碰区自由表面速度历史的典型特征.给出了锡飞层中折射激波对碰发生马赫反射的临界条件,解读了三波结构的传播行为,阐明了对碰区内存在"一维正冲击"区域,一维区外存在单次斜冲击向两次斜冲击过渡的复杂加载动力学过程,提出了对碰区冲击动力学模型,揭示了影响对碰区动载行为特征的机理.数值模拟结果与极曲线理论分析结果相互印证,符合较好.本文的研究成果,将为深入理解和解读对碰区特殊的物质破坏及混合现象提供重要的理论支撑.     

An axial flow cyclone to remove nanoparticles at low pressure conditions

In this study, the axial flow cyclone used in Tsai et al. (2004) was further tested for the collection efficiency of both solid (NaCl) and liquid (OA, oleic acid) nanoparticles. The results showed that the smallest cutoff aerodynamic diameters achieved for OA and NaCl nanoparticles were 21.7 nm (cyclone inlet pressure: 4.3 Torr, flow rate: 0.351 slpm) and 21.2 nm (5.4 Torr, 0.454 slpm), respectively. The collection efficiencies for NaCl and OA particles were close to each other for the aerodynamic diameter ranging from 25 to 180 nm indicating there was almost no solid particle bounce in the cyclone. The 3-D numerical simulation was conducted to calculate the flow field in the cyclone and the flow was found to be nearly paraboloid. Numerical simulation of the particle collection efficiency based on the paraboloid flow assumption showed that the collection efficiency was in good agreement with the experimental data with less than 15% of error. A semi-empirical equation for predicting the cutoff aerodynamic diameter at different inlet pressures and flow rates was also obtained. The semi-empirical equation is able to predict the cutoff aerodynamic diameter accurately within 9% of error. From the empirical cutoff aerodynamic diameter, a semi-empirical square root of the cutoff Stokes number, , was calculated and found to be a constant value of 0.241. This value is useful to the design of the cyclone operating in vacuum to remove nanoparticles.     

PEG接枝氧化石墨烯的制备与细胞成像

通过酯化反应将不同分子量的聚乙二醇(PEG)接枝到氧化石墨烯(GO)表面,得到系列GO-PEG。利用傅里叶变换红外光谱(FTIR)、拉曼光谱(Raman)、扫描电子显微镜(SEM)对GO-PEG的结构和形貌进行了表征,用热重分析(TGA)测定了GO-PEG中PEG的接枝量。SEM结果表明GO-PEG的剥离程度高于GO。GO-PEG在磷酸盐缓冲溶液中具有良好的分散稳定性,稳定性与接枝量呈正相关。GO-PEG通过非共价键合作用对荧光素(Flu)的负载量可达1.75 mg·mg-1,且负载量受接枝量影响;另外,GO-PEG对Flu的释放行为具有pH值触发药物释放性能。将接枝PEG的端羟基与Flu共价键合,所得GO-PEG6000-Flu荧光探针实现了对HepG2细胞的成像。